This unique product is a fibrous water soluble stabilizer and does a superior job of supporting dense embroidery designs. Embroider most free standing lace with just one layer! Its clean rinse capability makes it the best choice when using it with delicate fibers such as organdy or English netting. It is now available in a fusible as well as a sticky version.
* Use the fusible version of Wet N Gone® on sheer fabrics such as organdy, organza, lame, sheer silks and more to establish a solid type fabric that is easier to hoop and embroider. Once the embroidery is complete, all the stabilizer rinses away and will not shadow through.
* Use the sticky version of Wet N Gone® to embroider delicate designs on hard to hoop items such as the corners of handkerchiefs, silk blouse collars and more.
• Create free standing lace and use just one layer for most designs.
• Perfect for making appliqués, decorative pins and/or 3-D embroidery.
• Rinses clean leaving no messy residue.
• Use as a topping for wide satin stitch designs on high pile fabrics for perfect results!
To use Floriani Water Soluble Topping:
1) Place the stabilized garment in the hoop and secure the hoop on the machine.
2) Complete the centering and alignment of the design.
3) Cut a piece of Floriani Topping slightly larger than the size of the design and place it on top of the fabric.
4) Secure the Topping to the surface of the garment with scotch tape or by moistening the corners slightly and then sticking it down to the garment or the inside edges of the hoop.
5) Complete the embroidery.
6) Tear away as much of the topping as possible. Remove any remnants by moistening with a damp cloth, Q-Tip or steam from an iron.
* Tip – If your embroidery design is a satin stitch type embroidery and/or doesn’t have an outline, use a wet Q-Tip to go around the edge of the design before tearing any of the Topping away. This will prevent any distortion of the stitching.
