Floriani Medium Cutaway Fusible or Non-Fusible is a very soft yet solid 2.0 oz stabilizer that will support medium to heavy stitch count designs. It is ideal for fabrics that are considered un-stable; fabrics such as fleece, t-shirts, sweatshirts, polo knit, etc.
|
Sheer Fusible Interfacing to be used when adding embroidery to the most delicate fabrics such as silk, satin, lame or chamois, you can experience shredding.
|
Add dimension without the bulk with either Floriani Heat N Sta Fusible Fleece or Heat N Sta Light Fusible Fleece.
|
Light fusible coating perfect for embroidering on lightweight cotton, shirtweight denim, linen and other woven fabrics that tend to distort or stretch when they are hooped or when the embroidery is forming.
|
Use to create Free Standing Embroideries! Place one or two layers of the mesh hoop and stitch your design directly on it. Remove from the hoop and place on a heat resistant surface. Use a stencil burner to burn away the edges of the mesh from around the design!
|
A 'No Sew' bonding material to adhere patches, appliques and embroideries to most fabrics without stitching! Withstands laundering and dry cleaning and creates a permanent bond between fabric surfaces when heat is applied. NO sewing is required! Adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics.
|
Tearaway stabilizer (fusible and non-fusible) ideal for airy, open work type embroidery designs on light cottons and linen. By wetting the design, the stabilizer is easily torn away without distorting stitches or harming any delicate fibers of heirloom quality fabrics. The design will retain the non-soluble part of the stabilizer throughout the life of the garment; keeping the embroidery looking smooth.
|
A fibrous water soluble stabilizer that does a superior job of supporting dense embroidery designs. Embroider most free standing lace with just one layer! Its clean rinse capability makes it the best choice when using it with delicate fibers such as organdy or English netting.
|
